Need help?Do you have a question about the Owon B41T and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display | 6000 counts |
| Max Current | 10A DC/AC |
| Resistance Measurement | Yes |
| Capacitance Measurement | Yes |
| Frequency Measurement | Yes |
| Temperature Measurement | Yes |
| Resistance Range | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ |
| Temperature Range | -40°C to 1000°C |
| Bluetooth | Yes |
| Continuity Test | Yes |
| Diode Test | Yes |
| DC Voltage Accuracy | ±(0.5%+3) |
| DC Current Accuracy | ±(1.0%+3) |
| Continuity Buzzer | Yes |
| Battery | 2 x 1.5V AA |
| DC Current Range | 600μA/6000μA/60mA/600mA/10A |
| AC Current Range | 600μA/6000μA/60mA/600mA/10A |
| Frequency Range | 10Hz to 10MHz |
| Resistance Accuracy | +/-(0.8%+3) |
| Frequency Accuracy | +/-(1.0%+3) |
| Power Supply | 2 x 1.5V AA |
Precautions to avoid bodily injury and product damage during operation.
Defines the multimeter's safety rating and application categories.
Initial check of the multimeter and its accessories, and steps to install batteries.
Guide on how to use auto and manual ranging modes for measurements.
Details on the functions of the rotary switch positions and the keypad.
Procedure for measuring AC and DC voltage values with safety warnings.
Steps to measure resistance, including safety precautions for high-voltage circuits.
Procedure for testing diode forward bias and identifying issues.
Method to check circuit continuity, with an audible beep indicator.
Instructions for measuring capacitance, including safety for high-voltage capacitors.
How to measure frequency and duty cycle using the multimeter.
Procedure for measuring DC and AC current with essential safety warnings.
To Next Page
