5. Bluetooth Function –only for the model with Bluetooth
The model with Bluetooth supports communications with Android or iOS based smart
device through Bluetooth. You can use the free application software on the smart devices
to monitor the measurements, perform remote control, view trending graphs, etc. The
recorded data can be saved as CSV file. The maximum number of record that can be
stored depends on the free storage space in your smart device. More than one meters
can be connect simultaneously.
Note: Bluetooth connectivity works over a range of about 10 meters. The work range is
much longer in open-sided and non-occluded wide range environment, even up to 20
meters. When the Bluetooth function is idle for 10 minutes, the Bluetooth will be turned
off automatically. Before turning off, the buzzer will beep twice.
Install the free application software
System Requirements of Mobile Devices
Bluetooth 2.0 Android APP
Android devices with Bluetooth connectivity.
Android versions: 4.0 or above
Bluetooth 4.0 Android APP
Android devices with BLE 4.0 connectivity.
Android versions: 4.3 or above
Bluetooth 4.0 iOS APP
iPhone 6s/6s Plus, iPhone 6/6 Plus, iPhone 5c/5s, iPhone 5
(Support iPhone with BLE 4.0 connectivity, iOS7.0 or above; iPhone 4s or the older
devices are not supported.)
For Android device
Based on the system and Bluetooth version of your mobile device, select one from the
QR Codes below, scan it with your mobile device, select the app and install it.
Bluetooth 2.0 Android APP Bluetooth 4.0 Android APP
To Next Page
Loading...
Need help?
General
