1.Safety Information
Others
Run/Stop Run
Rel Off
Beeper Off
Threshold 50Ω
Freq Mode Freq
Unit
℃
Dual Off
Display All
Load KITS90
Mode DVC
Range Auto
Speed Low
Communicationinterfacesettings
Press the front panel key, press the Next softkey to access the
communication interface setting menu.
Press the Baud softkey to select the desired baud rate from 2400, 4800, 9600,
19200, 38400, 57600 or 115200. The default is 115200. Make sure that the baud
rate matches that of the computer.
Press the Parity softkey, select the parity from None, Odd or Even. The default is
None.
Press the Stop Bits softkey, select the stop bits from 1, 2.
The Data Bits is xed to 8.
To Next Page
Loading...
