OxyGo Next - Specifications

23
8. Specications
Dimensions:
w/ 8-cell battery
w/ 16-cell battery
L / W / H: 7.19 in. / 3.26 in. / 7.11 in.
L / W / H: 7.19 in. / 3.26 in. / 8.15 in.
L / W / H: 7.19 in. / 3.26 in. / 9.03 in.
Weight: 4.77 pounds (includes single battery)
Noise: 38 dBA at setting 2
Maximum Sound Power of 60 dBA and Maximum
Sound Pressure level of 50 dBA per ISO 80601-2-69
Warm up time: 2 minutes
Oxygen Concentration**: 90% - 3% /+ 6% at all settings
Flow Control Settings: 6 settings: 1 to 6
Maximum Outlet Pressure < 28.9 PSI
Power: AC Power Supply:
DC Power Cable:
Rechargeable Battery:
AC Input: 100 to 240 VAC
50 to 60 Hz
Auto-Sensing: 2.0-1.0A
DC Input: 13.5-15.0VDC,10A Max.
Voltage: 12.0 to 16.8 VDC (±0.5V)
Battery Duration*: Up to 6.5 hours with single battery
Up to 13 hours with double battery
Battery Charging Time: Up to 3 hours for a single battery
Up to 6 hours for a double battery
Environmental Ranges Intended for
Use:
Temperature: 41 to 104˚F (5 to 40˚C)
Humidity: 0% to 95%, non-condensing
Altitude: 0 to 10,000 ft (0 to 3048 meters)
Environmental Ranges Intended for
Shipping and Storage:
Temperature: -13 to 158˚F (-25 to 70˚C)
Humidity: 0% to 95%, non-condensing
Store in a dry environment
Altitude: 0 to 10,000 ft (0 to 3048 meters)
Transportation: Keep Dry, Handle With Care
*Battery time varies with ow setting and environmental conditions
** Based on atmospheric pressure of 14.7 psi (101 kPa) at 70°F (21°C)
Contains Transmitter Module IC: 2417C-BX31A. Contains FCC ID: N7NBX31A
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Classication:
• IEC Class II Equipment
• Type BF Applied Part
• IP22 Drip Proof
• Not suitable for use in the presence of a
ammable anesthetic mixture
with air or with oxygen or nitrous oxide.
• Continuous Operation