RTR-2000U
5. OPERATING THE ROTARY TOOL
1 Turn the rotary tool on. 2 Select the appropriate speed
for the application.
3 For high precision
applications such as
engraving or milling, hold
the rotary tool like a pen.
5 Gently apply the tip of the
accessory to the work piece.
4 For heavy work like
cutting or grinding,
hold the rotary tool
in the palm of your
hand.
WARNING! PLACING EXCESSIVE LOAD ON THE ROTARY
TOOL WHILE IT IS RUNNING AT LOW SPEEDS MAY
CAUSE IT TO OVERHEAT AND THE MOTOR TO FAIL.
To Next Page
Loading...
