Ozito RTK-2100 - ACCESSORY GUIDE; ASSEMBLY; SANDING ACCESSORIES; CUTTING ACCESSORIES

TYPE QTY/ SIZES INCLUDED APPLICATIONS
ASSEMBLY
Collet
1.5mm x1
2.3mm x2
3.2mm x1
Used to t a variety of accessories, with
different shank sizes, to your rotary tool.
Mandrel
x3
A mandrel is a shank to which polishing
accessories, cutting wheels and sanding
wheels can be tted.
Screw Mandrel
x1
A shank which screws into the felt
polishing tip and wheels.
Sanding Drum
12.7mmx12.7mm x1
6.35mmx12.7mm x1
A shank used with sanding paper drums
SANDING ACCESSORIES
Sanding Bands
12.7mmx12.7mm x4
6.35mmx12.7mm x8
Shapes wood, smoothes breglass, sand
inside curves and other difcult to reach
places.
Sanding Discs
180Grit x40
320Grit x40
Made to t on a mandrel. They can be
used for nearly any small sanding job you
may have.
Flap Wheels
80Grit x1
Grind and polish at or contoured
surfaces. They are used most effectively
as a nishing sander after heavier surface
sanding and material removal has been
completed.
CUTTING ACCESSORIES
Cutting Wheels
Regular Cut-off Wheels x36
Heavy Duty Cut-off Wheels x30
Fibreglass Cut-off Wheels x5
Thin discs of emery or breglass used for
slicing and cutting applications. Use them
for cutting off frozen bolt heads and nuts
etc.
High Speed Cutters
x2
Used in carving, cutting and slotting
in wood, plastics and soft metals like
aluminium. Good for free-hand routing and
precision cutting.
Engraving Cutters
x5
Made for intricate work on ceramics, wood
carvings, jewelry and scrimshaw. Available
in a wide variety of shapes and sizes.
ACCESSORY GUIDE
*Various Proles
*Various Proles