Ozotech AIO3 Systems - AIO Controller Ozone Programming Settings

-6-
AIO-OZONE Installation & Programming Guide
AIO Controller - Ozone Programing Settings
Press NEXT and DOWN
simultaneously and release.
Press NEXT and DOWN
simultaneously for 5
seconds and release. If the
screen in Step 2 does not appear, the lock on the valve is
activated.
To unlock, press DOWN, NEXT, UP and CLOCK in
sequence, then press NEXT and DOWN simultaneously
for 5 seconds and release. Press NEXT and DOWN
simultaneously for 5 seconds and release.
Step 1
CLOCK
NEXT
UP DOWN
REGEN
CLOCK
NEXT
UP DOWN
REGEN
Use UP or DOWN to select
FILTERING REGEN.
Press NEXT to go to
Step 3.
Press REGEN to exit
Configuration Settings.
Step 2
Use UP or DOWN to set
2nd backwash to OFF.
Press NEXT to go to
Step 6.
Press REGEN to return to
previous step.
Step 5
CLOCK
NEXT
UP DOWN
REGEN
TIMESET
SOFTENING
FILTERING
TODAY
NORMAL
GAL
MIN
x1000
NOR
CAPACITY
BACKWASH BRINEFILL RINSE
REMAINING
PAM
Use UP or DOWN to set
RINSE to OFF.
Press NEXT to go to
Step 7.
Press REGEN to return to
previous step.
Step 6
CLOCK
NEXT
UP DOWN
REGEN
TIMESET
SOFTENING
FILTERING
TODAY
NORMAL
GAL
MIN
x1000
NOR
CAPACITY
BRINEFILL RINSE
REMAINING
PAM
Use UP or DOWN to set
FILL to OFF.
Press NEXT to go to
Step 8.
Press REGEN to return to
previous step.
Step 7
CLOCK
NEXT
UP DOWN
REGEN
TIMESET
SOFTENING
FILTERING
TODAY
NORMAL
GAL
MIN
x1000
NOR
CAPACITY
FILL
REMAINING
PAM
Use UP or DOWN to set
REGEN to OFF.
Press NEXT to go to
Step 9.
Press REGEN to return to
previous step.
Step 8
CLOCK
NEXT
UP DOWN
REGEN
TIMESET
SOFTENING
FILTERING
REGEN
TODAY
NORMAL
GAL
MIN
x1000
NOR
CAPACITY
BACKWASH BRINEFILL RINSE
REMAINING
PAM
Use UP or DOWN to adjust
backwash time.
Press NEXT to go to
Step 4.
Press REGEN to return to
previous step.
Step 3
CLOCK
NEXT
UP DOWN
REGEN
TIMESET
SOFTENING
FILTERING
REGEN
TODAY
NORMAL
GAL
MIN
x1000
NOR
CAPACITY
BACKWASH
REMAINING
PAM
Step 4 alternates between
the two displays shown.
Use UP or DOWN to adjust
brine time.
Press NEXT to go to
Step 5.
Press REGEN to return to
previous step.
Step 4
TIMESET
SOFTENING
FILTERING
REGEN
TODAY
NORMAL
GAL
MIN
x1000
NOR
CAPACITY
BACKWASH
REMAINING
PAM
BRINE
TIMESET
SOFTENING
FILTERING
REGEN
TODAY
NORMAL
GAL
x1000
NOR
CAPACITY
BACKWASH
REMAINING
PAM
BRINE
CLOCK
NEXT
UP DOWN
REGEN
CLOCK
NEXT
UP DOWN
REGEN
TIMESET
SOFTENING
FILTERING
REGEN
TODAY
NORMAL
GAL
MIN
x1000
NOR
CAPACITY
BRINE
REMAINING
PAM
Step 9 alternates between
the two displays shown.
Use UP or DOWN to set
RELAY 1 to ON.
Press NEXT to go to
Step 10.
Press REGEN to return to
previous step.
Step 9
TIMESET
SOFTENING
FILTERING
REGEN
TODAY
NORMAL
GAL
MIN
x1000
NOR
CAPACITY
BACKWASH BRINEFILL RINSE
REMAINING
PAM
CLOCK
NEXT
UP DOWN
REGEN
TIMESET
SOFTENING
FILTERING
REGEN
TODAY
NORMAL
GAL
MIN
x1000
NOR
CAPACITY
BACKWASH BRINEFILL RINSE
REMAINING
PAM