PAB Fire Compact - All Round Neck Protector Attachment

21
ATTACHING AN ALL ROUND (“Holland style”) neck protector
1
Attach the neck protector using the 3 snap fasteners on the interior of the
helmet’s shell and the Velcro fastener on the inner front part of the shell:
First step: fasten the neck protector to the snap fasteners on both sides of the
helmet (see number 1 on Picture 24)
Second step: fasten the neck protector to the snap fastener on the rear of the
shell (see number 2 on Picture 24)
Third step: wrap the neck protector using the Velcro fasteners and fasten it to the
helmet using the Velcro fastener on the inner front part of the shell (see number
3 on Picture 24). Make sure that the round slots on both sides of the neck
protector are positioned around the chinstrap xing point.
Fourth step: place the helmet on the head, tighten the headband, close the chin
strap and close the neck protector using the Velcro fastener at the bottom (see
number 4 on Picture 24)
Picture 24