25
The length of the useable life of this helmet will be affected by the types of
materials used in its construction and the environments in which the helmet
is used and stored. Recommendations on this topic should be sought from the
manufacturer.
The helmet absorbs the energy of a blow by partial destruction of, or damage to,
the helmet. Even though such damage may not be readily apparent, any helmet
subjected to severe impact should be replaced.
An unusual event may require to replace a product after only one use. This depends
on the type and intensity of use, or the environment in which it is used: aggressive
environments, extreme temperatures, contact with chemicals, strong impacts...
For more details about maintenance and spare parts replacement please contact
PAB Akrapovic.
Warning:
Do not drop the helmet. Prevent impacts to the helmet that could damage (scratch
or cause cracks) the face shield.
Check regularly the helmet for cracks on the parts in contact with the skin. These
damages could cause discomfort.
Do not apply cleaning products on a hydrocarbon base, solvents, paint or stickers to
the helmet or visors to prevent damage to the materials of the helmet.
Storage
To extend the lifetime of this product to the maximum:
• Store the helmet in its storage bag and/or in a closed cabinet to prevent
extended exposure to cold, heat, humidity, light, exhaust fumes,…
• After use and before storing clean the helmet (the shell and all other
components).
MAINTENANCE AND CLEANING
To Next Page
Loading...
