7
OVERVIEW
Warning:
Inappropriate use, maintenance or servicing can affect the function of the helmet
and can seriously endanger the user’s life. The helmet’s operability must be checked
and veried before each use. The helmet is not to be used if the operability test is
unsuccessful, if the helmet is damaged, if proper servicing or maintenance has not
been made, or if PAB original spare parts have not been used.
When tted with another item of personal protective equipment or with an accessory
(other than as supplied by the helmet manufacturer for use with this helmet) a
helmet marked as complying with EN 443 might no longer satisfy all clauses of the
standard. Refer to information provided by the helmet manufacturer.
The helmet provides protection of head and face against shock, sharp objects,
splatters of corrosive chemicals (Sulphuric acid, Sodium hydroxide, p-Xylene,
Butan-1-ol, n-Heptane), molten metals, radiating heat, ames, electric current. The
user’s protection is not guaranteed in situations where the conditions exceed those
described in the specications above.
The helmet absorbs the energy of a blow by partial destruction of, or damage to,
the helmet. Even though such damage may not be readily apparent, any helmet
subjected to severe impact should be replaced.
Replace any damaged parts only with original PAB parts, as only these original parts
are authorised and ensure the performance of the helmet.
Warning:
Safety provided by the helmet can only be ensured when it is properly assembled
and correctly tted, removable parts shall not be worn separately.
This helmet complies with the retention requirements of standard EN 443:2008, only
when the chin strap supplied by PAB is worn and adjusted in accordance with these
instructions.
To Next Page
Loading...
