PABX TC-2000 A - User Manual

Models:
TC-2000 H
TC-2000 A
TC-2000 P
TC-2000 PP

Summary

Chapter 1: Brief Introduction

1.1 Precautions

Essential safety guidelines and precautions for operating the PABX system to prevent damage or malfunction.

1.2 Technical Index

Detailed technical specifications and parameters of the PABX system, including capacity, current, and signal tones.

1.3 Names

Identification of physical ports and components on PABX units, including front, left, and back views of various models.

Chapter 2: Programming and Operating

2.1 Unlock System Password

Procedure to unlock the system programming mode using the default or a custom password.

2.2 Change System Password

Instructions for modifying the system access password to enhance security.

2.3 Internal Call

How to make calls between extensions within the PABX system.

2.4 Outside (CO) Line Connection Assignment

Configuration for assigning incoming/outgoing CO (public telephone) lines to the PABX system.

2.5 Access Outside (CO) Line Instruction

Methods for extensions to access external CO lines for making calls.

2.6 Ringing Extensions of Certain CO Line

Assigning specific extensions to ring for incoming calls on particular CO lines.

2.7 Answer Incoming Call

Procedures for answering incoming calls, either by pre-assigned ringing extensions or call pickup.

2.8 Answering Mode Assignment

Configuring the system to operate in Operator Answering or Auto-Attendant mode.

2.9 Attendant Extensions Assignment

Designating extensions as primary and secondary attendants for auto-attendant service.

2.10 Outgoing Message (OGM) For Auto-Attendant Service

Recording and managing outgoing messages for the auto-attendant feature.

2.11 Call Permission Management

Setting call restrictions for extensions based on call types or destination numbers.

2.11.5 Class Assignment for Certain Extension

Assigning call permission classes to individual extensions based on digit prefixes.

2.11.6 Class Assignment for All Extensions

Applying call permission classes to all extensions simultaneously.

2.11.7 Front Digits of Phone Number Management

Managing forbidden or permitted call prefixes for specific groups.

2.11.8 Extension is Permitted Use Certain CO Line Only

Restricting an extension to use only a specific CO line for outgoing calls.

2.11.9 Exclusive CO Line of Superior Extension

Assigning a CO line exclusively to a superior extension.

2.11.10 Executive Busy Override (EBO)

Allows authorized users to interrupt or override a busy CO line.

2.11.11 External Call is Time-limited

Setting time limits for external calls to automatically disconnect after a specified duration.

2.12 Call Transferring Management

Managing how incoming calls are transferred between extensions, including busy and unconditional transfers.

2.13 Party Conference (1 CO & 2 Extensions)

Instructions for setting up a three-party conference call with one CO line and two extensions.

2.14 Flash Time

Configuring the duration of the flash signal for call transfer or other features.

2.15 External Call Waiting

Handling incoming calls while on an external call, allowing switching between calls.

2.16 Verify Holding Music

Functionality to check or verify the performance of holding music.

2.17 Extension Number Assignment

Procedures for changing or assigning extension numbers to specific system jacks.

2.18 Extension Number Confirmation

How to check the current extension number and its associated jack number.

2.19 Restore All Extension Numbers

Resetting all extension numbers back to their factory default settings.

2.20 Factory Settings (Default)

Restoring the entire system configuration to its original factory defaults.

PABX TC-2000 A Specifications

General

Brand	PABX
Model	TC-2000 A
Category	Switch
Language	English