When N = 1, extension will enter free CO line as soon as off-hook
and user can input phone number directly, but he must input * ABC
when he needs to make internal call.
1. Suggest assign N = 1 ( access CO line directly) for extensions which
make external calls frequently.
2. Related operating please refer 2.5.1 / 2.5.2.
2.6 Ringing Extensions of Certain CO Line ( For Operator Attendant Service)
Format : * 1 M ABCD #
M = CO line jack number
ABCD = Last digit of extension number.
Description: Assign which extensions will ring when has incoming call via
certain CO line.
Example: Assign extensions 803 and 804 will ring when has incoming call on
CO line 2.
Operating: Input * 1 2 34 #
1. Allows assign up to eight extensions are ringing at the same time
for each CO line, the new setting will replace the old one.
2. Ringing extension can be selected from jack NO.01 to 08 only.
2.7 Answer Incoming Call
Description: Extension user can answer the phone by lifts ringing exension which
pre-assigned for operator attendant mode purpose, however, none of
extension will ring at auto-attendant mode until caller input extension
number or dial related number to access operator.
Formate 1 : # 7 ( At non-direct access CO line mode )
Formate 2: * # 7 ( At direct access CO line mode )
Description: User can answer the phone which ringing at other extension.
2.7.1 By Ringing Extension
2.7.2 By Non-Ringing Extension ( Call Pick Up)
2.8 Answering Mode Assignment
2.8.1 Operator Answering Mode
Format 1 : * 21 # ( All CO lines at Operator Answering mode )
Description: Operator lifts ringing extension can answer incoming call.
2.8.2 Auto-Attendant Answering Mode
Format 1 : * 20 # ( All CO lines at Auto-attendant Answering mode )
Format 2 : * 20 M # ( Certain CO lines at Auto-attendant Answering mode)
M = CO line jack number
- 6 -
Chapter 2: Programming and Operating
To Next Page
Loading...
Need help?
General
