2.19 Restore All Extension Numbers
Format : * 7 000 #
Description: Restore all extension numbers to factory setting 801 ~832.
2.17 Extension Number Assignment
Format 1 : * 7 abc ABC #
abc = Original extension number at factory setting(801~832)
ABC = New extension number
Description: Allows change extension number for certain jack.
Example: Change current extension number 803 to 333, 804 to 128.
Operating: Input * 7 803 333# 804 128#.
1. Same extension number is unallowable .
2. Extension number can be assigned from 100 ~ 999 freely.
- 13 -
Some factory settings for your reference as following:
Caller ID signal
Adapt with FSK, DTMF
Hookswitch flash time
1000ms (M=2)
Function
Default Setting
Operator attendant
801 / 802 / 803 / 804
No
Service mode
Ringing extensions
1
2
3
4
5
6
Attendant extensions for auto-attendant
802 / 803
Access CO line mode
Dial 0 or tap hookswitch
2.20 Factory Settings (Default)
Format : * 6 000 #
Description: All data can be restored to factory setting except followings:
1. Outside line connection assignment.
2. Extension number settings.
2.18 Extension Number Confirmation
Format 2: # 81
Description: System will report extension number and its port number afer user
input this format on his extension.
This programming is ineffective for model TC-2000H.
Format 1: # 82 ( For model TC-2000H )
Description: Extension user input this format on his phone can see its jack number
and current extension number.
Example: Original extension number 804 has been changed to 123, user can see
804123 is displayed which indicates original number is 804 and current
extension number is 123.
Chapter 2: Programming and Operating
To Next Page
Loading...
Need help?
General
