10
ELECTRICAL
Double Insulation
Double insulation is a concept in safety in electric power tools
which eliminates the need for the usual three-wire grounded power
cord. All exposed metal parts are isolated from the internal metal
motor components with protective insulation. Double insulated
tools do not need to be grounded.
WARNING
• The double insulated system is intended to protect the user from
shock resulting from a break in the tool’s internal wiring. Observe
all normal safety precautions to avoid electrical shock.
IMPORTANT
• Servicing of a tool with double insulation requires extreme care
and knowledge of the system and should be performed only by a
qualied service technician. For service, we suggest you return
the product to your nearest authorized service center for repair.
ALWAYS use original factory replacement parts when servicing.
• DO NOT alter or misuse tool. Any alteration or modication is a
misuse and may result in serious personal injury.
• Save these instructions. Refer to them frequently and use them to
instruct others who may use this tool. If you loan someone this tool,
loan them these instructions also.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SAFETY INFORMATION
To Next Page
Loading...