13
Applications
This tool is used for removing the old, moldy, mildewed and dirty
darkened grout with the pointed and chisel tips provided. It is
designed to remove non-sanded or unsanded grout and used on
most grout joints that are 1/8 in. or less.
Function Description
WARNING
• ALWAYS remove plug from wall outlet when tool is not in use.
Failure to comply could result in accidental starting and possible
serious personal injury.
• If any parts are damaged or missing, do not operate tool until the
parts are replaced. Use of this product with damaged or missing
parts could result in serious personal injury.
• DO NOT attempt to modify this product or create accessories not
recommended for use with this product. Any such alteration or
modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
On/Off Switch
This tool has an On/Off switch (A)
located at the rear of the product.
1. To turn the tool ON, press the
on/off switch (A) to the ON (I)
position.
2. To turn the tool OFF, press the
on/off switch (A) to the
OFF (O) position.
1
A
2
A
OPERATING INSTRUCTIONS
To Next Page
Loading...