14
Installing the Tips
1. Unplug power cord (C). Insert
hex wrench (H) into setscrew (E)
and turn counterclockwise.
2. Choose the tip for the job.
Use the pointed tip (G) on
cement-based grout joints where
grout width is 1/8 in. or less.
Use the chisel tip (F) for varying
widths of grout, such as those
around kitchen sinks and soap
dishes or areas where tile meets
the bathtub.
3. Insert desired tip (F/G) into
output shaft (D). Ensure
tip (F/G) is fully inserted. Turn
hex wrench (H) clockwise to
tighten. Once tightened, gently
pull on tip (F/G) to make sure it
is secure.
Note: DO NOT overtighten. It
might damage hex wrench (H)
and/or setscrew (E).
2
1
1
To Next Page
Loading...