18
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Grout
removal
tool will not
start.
1. Power cord not
plugged in.
2. Power fault, fuse
or circuit breaker
tripped.
3. Cord damaged.
4. Faulty switch.
5. Faulty motor.
1. Make certain the cord is
connected to the power
supply.
2. Check the power supply.
3. Use authorized service
center to repair or
replace.
4. Use authorized service
center to repair or
replace switch.
5. Use authorized service
center to repair or
replace motor.
If you have any questions regarding the product, please call
customer service at 1-877-876-7562, 8 a.m. - 5 p.m., CST,
Monday - Friday.
WARNING
• Unplug the tool from the power supply before performing
troubleshooting procedures.
To Next Page
Loading...