Pace Setter G02743 - Page 19

19
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Poor
working
performance.
1. Extension cord
too long or
undersized.
2. Tool stopped
working.
3. Tool is
overheating.
4. Dull bit.
1. Use extension cord
heavy enough to carry
the current.
2. Release excessive
pressure by moving the
tool and accessory.
3. Turn off tool and
let it cool to room
temperature.
4. Check and change the bit.
Vibration or
abnormal
noise.
1. Accessory not
secured.
1. Check the accessory,
ensure it is fully xed.
TROUBLESHOOTING