17
CARE AND MAINTENANCE
WARNING
• When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage.
• To avoid accidents, always disconnect the tool from the power
supply before cleaning or performing any maintenance.
1. Use a soft brush to remove any accumulated dust. Wear safety
glasses to protect your eyes whilst cleaning.
2. If the body of the tool needs cleaning, wipe it with a soft damp
cloth. A mild detergent can be used but never alcohol, petrol or
other harsh cleaning agents.
3. NEVER use caustic agents to clean plastic parts.
CAUTION
• Water must never come into contact with the tool.
To Next Page
Loading...