To Next PageTo Next Page
Need help?Do you have a question about the Pace MicroBenchtop MBT-100 and is the answer not in the manual?
Provides an overview of the PACE Micro Bench Top Systems and their models.
Details power requirements, vacuum/air capabilities, and physical parameters for different models.
Lists components for MBT-100/100E systems, referring to diagrams and tables.
Lists components for MBT-200/200E systems.
Lists and describes the individual parts of the SX-55 Extractor Handpiece.
Step-by-step guide for setting up the MBT-100/100E and MBT-200/200E systems.
Instructions on how to operate the MBT-100/100E and MBT-200/200E systems.
How to use the handpiece and initial steps of vacuum desoldering.
Covers continued vacuum extraction and other methods like hot-air and terminal desoldering.
Procedure for cleaning the glass chamber and its components.
Instructions for replacing the VisiFilter and Extractor Handpiece Heater Assembly.
Procedures for replacing the soldering iron heater and its tips.
Steps for dealing with jammed/broken tips and replacing the fuse.
Steps for cleaning, removing, or replacing the cord and switch assembly.
Troubleshooting table linking symptoms, causes, and solutions for common problems.
Lists replacement parts for the Micro Soldering Iron Assembly with part numbers.
Lists replacement parts for the MBT-100/100E systems with part numbers.
Lists replacement parts for the MBT-200/200E systems with part numbers.
Lists replacement parts for the SX-55 Extractor Assembly with part numbers.
Lists replacement parts included in the accessory kits for various models.
General| Brand | Pace |
|---|---|
| Model | MicroBenchtop MBT-100 |
| Category | Soldering Gun |
| Language | English |
