To Next PageTo Next Page
Need help?Do you have a question about the Pace ADS200 and is the answer not in the manual?
General| Brand | Pace |
|---|---|
| Model | ADS200 |
| Category | Soldering Gun |
| Language | English |
Provides initial information for setting up, operating, and maintaining the ADS200 Soldering System.
Details electrical, physical, and performance specifications for the ADS200 system and its components.
Specifies temperature range, resolution, stability, and accuracy for AccuDrive® cartridges.
Defines electrostatic discharge and leakage specifications for the ADS200 system.
Outlines critical safety precautions for personnel using or servicing the ADS200 system.
Instructions for connecting the AccuDrive® TD-200 handpiece to the ADS200 power supply.
Steps for connecting the optional Instant SetBack Tool Stand to the ADS200 system.
Step-by-step guide for operating the ADS200 soldering system after setup.
Explains the meaning of the LED indicator lights on the power source front panel.
Describes the information displayed by the ADS200's 3-digit LED display during normal use.
Explains what the LED display shows when adjusting the desired tip temperature.
Lists and explains the default configuration settings for various features of the ADS200 system.
Provides instructions on how to enter the system's Set-Up Mode for customization.
Details how to enter, remove, or change the system password for security.
Explains how to set the default temperature scale to either °C or °F.
Describes how to view and adjust the High Temperature Limit for the system.
Describes how to view and adjust the Low Temperature Limit for the system.
Explains the Temperature Setback feature for tip preservation and energy saving.
Details the AutoOff safety feature that turns off power after a period of inactivity.
Explains the delay before the system enters SetBack mode when the handpiece is placed in the ISB Tool Stand.
Describes how to set and activate three programmable temperature presets.
Explains how to set the temperature the system defaults to during SetBack mode.
Details the Temperature Match Mode and refers to a separate manual for specifics.
Provides instructions for exiting setup and explains common error message codes.
Provides solutions for common power source malfunctions like no power or no heat.
Lists spare parts with descriptions and PACE part numbers for ordering.
Lists and describes standard and ultra-performance AccuDrive® tip-heater cartridges with part numbers.
Advises users to contact PACE or a local distributor for service and repair.
Outlines the terms and conditions of the limited warranty for PACE products.
Lists PACE's trademarks and service marks and product compliance information.
Provides contact details for PACE Incorporated in the USA and Europe.
