©2018 PACE Inc., Vass, North Carolina, All Rights Reserved Page 10
Power Source
Most malfunctions are simple and easy to correct.
Symptom Probable Cause Solution
No power to
system
Blown Fuse
Replace the fuse (located in the AC Receptacle Fuse
Holder) with one of the same rated value.
Defective Tip-Heater Cartridge Refer to the appropriate handpiece manual
Handpiece will
not heat
Power Source Malfunction Contact PACE
Spare Parts
Description PACE Part Number
Fuse 1.25 Amp, Time Lag (for 115V) 1159-0251-P5
Fuse 0.63 Amp, Time Lag (for 230V) 1159-0214-P5
Optional under shelf mounting bracket 1321-0609-P1
To Next Page
Loading...
