Pace MBT360 - User Manual

Other manuals for Pace MBT360

Quick Start Guide6 pages

Need help?

Do you have a question about the Pace MBT360 and is the answer not in the manual?

Summary

General Information

Introduction

Provides an overview of the MBT360 system and its capabilities, encouraging thorough reading.

Specifications

Details the technical specifications including power, physical parameters, and temperature ranges.

Capabilities

MBT360 Compatible Handpieces

Lists and describes the various handpieces compatible with the MBT360 system for different applications.

Initial Set-Up

Attaching Tip & Tool Stand to MBT360

Details the procedure for physically attaching the Tip & Tool Stands to the MBT360 chassis.

Instant SetBack Tool Stand Connection

Explains how to connect and utilize the Instant SetBack Tool Stand for automatic temperature setback.

Basic Operation

Definitions

Explains key terms like Auto-Off, Normal Operation, Password, Setup Mode, and Temperature SetBack.

Operation

Guides on ensuring setup is complete, powering on the unit, and adjusting tip temperature settings.

LED Indicator Meanings

Describes the color codes of the front panel LEDs and what they indicate about handpiece status.

Tip-Heater Cartridge Temperature Match Offset

Customizing Your System

Entering Set-Up Mode

Provides the procedure to enter the system’s Set-Up Mode for configuration changes.

Password

Describes how to set up a password to secure the Set-up Menu from unauthorized access.

Temperature Match Offset Control Mode

Corrective Maintenance

Power Source

Details troubleshooting steps for issues related to the power source, such as no power or blank display.

Optional AccuDrive Blue Series Tip-Heater Cartridges

Standard Tips

Lists standard tips suitable for delicate micro-soldering and high thermal mass applications, with part numbers.

Ultra-Performance Tips

Lists tips designed for optimized geometries and increased thermal pipeline for maximum heat throughput.

PACE LIMITED WARRANTY STATEMENT

Limited Warranty

Covers the warranty period, exclusions, and conditions for products manufactured by PACE.

The PACE model MBT360 is a digital soldering/desoldering rework system designed for continuous use with up to three handpieces, combining the reliability of SensaTemp technology with the speed of AccuDrive. It is suitable for a wide range of applications, from high thermal mass tasks to delicate micro-soldering and high-volume work.

Function Description:

The MBT360 system provides precise temperature control for soldering and desoldering operations. It features two AccuDrive power ports and one SensaTemp power port, allowing for simultaneous use of various handpieces. The integrated dual-purpose vacuum/pressure pump system, utilizing PACE's patented SNAP-VAC Technology, delivers high vacuum for desoldering and precise air pressure for air pencils. The system's SensaTemp technology is known for temperature stability in high thermal mass applications, while AccuDrive technology offers fast response times for high-volume, fast-paced environments.

Important Technical Specifications:

Power Requirements:
- MBT360: 108-132 VAC, 50/60 Hz, 300 Watts RMS at 120 VAC.
- MBT360 E: 207-265 VAC, 50 Hz, 300 Watts RMS at 230 VAC (CE Conformity Marking).
Physical Parameters:
- Size: 13.5 cm H x 16.5 cm W x 26 cm D (5.3"H x 6.5"W x 10.25"D).
- Weight: 6 Kg. (13 Lbs.).
- Vacuum Rise Time: Less than 200 milliseconds to pull 254mm/Hg (10 in/Hg) vacuum on a 33 cubic centimeter (2 cubic inch) reservoir.
- Vacuum: 880mbar (26 in. Hg.) Nominal.
- Pressure: 28 KPa (4 P.S.I.) Nominal MAXIMUM setting.
- Air Flow: 9 SLPM (0.32 SCFM) MAXIMUM.
Temperature Specifications:
- Tip Temperature Range: 38-482 °C (100-900 °F) for SensaTemp; 177-454 °C (350-850 °F) for AccuDrive.
- Digital Readout Resolution: ±1° (°C or °F).
- Tip Temperature Stability: ±1.1°C (2°F) at Idle from Set Tip Temperature.
- Temperature Accuracy: Meets or exceeds ANSI JSTD 001.
EOS/ESD Specifications:
- Tip-To-Ground Resistance: Less than 2 ohms.
- AC Leakage: Less than 2 Millivolts RMS from 50 Hz to 100 MHz.
Environmental Requirements:
- Ambient Operating Temperature: 0°C to 40°C (32°F to 104°F).
- Storage Temperature: -40°C to 100°C (-40°F to 212°F).

Usage Features:

The MBT360 features a user-friendly control panel with a Liquid Crystal Display (LCD) providing temperature information for all three channels. A PROGRAM KEY is used to accept settings and scroll through system channels, while SCROLL UP and SCROLL DOWN keys adjust temperature and navigate menu options. Tri-colored LEDs (Green, Amber, Red) indicate handpiece connectivity and status.

Compatible handpieces include:

AccuDrive:
- TD-200 handpiece: Responsive soldering iron using tip-heater cartridges.
- MT-200 handpiece: Tip heater cartridge tweezers for SMD removal.
SensaTemp:
- PS-90 Soldering Iron: For SMD and thru-hole installation/removal, offering high thermal performance.
- SX-100 Sodr-X-Tractor: Air handpiece for thru-hole desoldering on high-mass multilayer boards.
- TT-65 ThermoTweez handpiece: For removal of PLCC, LCCC, and other surface mount devices.
- TJ-70 Thermo Jet handpiece: Finger switch activated precision air pencil for SMD installation/removal.

The system includes a PRESSURE ADJUSTMENT knob for airflow delivery and quick-connect ports for pressure (ThermoJet) and vacuum (Sodr-X-Tractor, ThermoPik). An optional foot pedal can activate vacuum or pressure.

Customization and Set-Up:

The MBT360 offers extensive customization through its Set-Up Mode, accessible by holding the PROGRAM KEY while powering on. Features include:

Password Protection: Prevents unauthorized alteration of system parameters.
Temperature Scale: Selectable between °F and °C.
Temperature Limits: Adjustable upper and lower limits for each channel.
Automatic Setback Timer: Reduces tip temperature after a period of inactivity (10-90 minutes, default 30 minutes) to preserve tip life and save energy. Can be disabled.
SetBack Reset: Allows individual or all channels to exit SetBack mode.
AutoOff: Turns off power to handpieces after a predetermined time in SetBack (10-90 minutes, default 60 minutes). Can be disabled.
SetBack Temperature: Adjustable temperature for SetBack mode (150°C/300°F to 230°C/450°F, default 177°C/350°F).
Temperature Match Offset Control Mode: Allows for calibration and offset adjustments for AccuDrive (channels 1 & 2) and SensaTemp (channel 3) handpieces. Different modes (OS Mode 1, 2, 3) determine how offsets are handled when handpieces or tips are removed.
LCD Contrast and LED Backlight: Adjustable for optimal visibility.

Instant SetBack Tool Stand Connection:

Optional Instant SetBack (ISB) cubbies can be connected to channels 1 and 2. Placing a handpiece into an ISB cubby activates Temperature Setback Mode after 30 seconds, and lifting it resumes normal operation.

Maintenance Features:

The manual provides a troubleshooting guide for common malfunctions, including:

No power to system (blown fuse, unplugged cord).
Heater assembly not heating (open heater, contact PACE).
Little or no air flow (kinked air hose, contact PACE).
Little or no vacuum (worn vacuum pump, contact PACE).
Blank display (backlight/contrast settings, contact PACE).

Display message codes are provided to help diagnose issues such as "WRONG PASSWORD," "ISB" (Instant SetBack), "CHP" (Check HandPiece), "OCE" (Over Current Error), and "SBk" (SetBack). Spare parts, including fuses and motor/pump assemblies, are listed with PACE part numbers. The manual emphasizes the importance of using appropriate accessories and genuine PACE tip-heater cartridges to prevent damage and ensure correct operation. Regular maintenance and proper handling of chemicals (solder paste, flux) are also highlighted for safety and longevity.