Pacific hydrostar PacificHydrostar 2" Gasoline Powered Clear Water Pump User Manual

2" Gasoline Powered Clear Water Pump
Item 68375
Using an engine indoors CAN KILL YOU
IN MINUTES.
Engine exhaust contains carbon monoxide.
This is a poison you cannot see or smell.
NEVER use inside
a home or garage,
EVEN IF doors and
windows are open.
Only use OUTSIDE
and far away from
windows, doors,
and vents.
When unpacking, make sure that the product is intact and undamaged.
If any Pump parts are missing or broken, please call 1-800-444-3353 as soon as possible.
If any Engine parts are missing or broken, please call 1-800-520-0882 as soon as possible.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually
as replacement parts.
Visit our website at: http://www.harborfreight.com
Email our tech support at: tech@harborfreight.com
Email our Engine support at: predator@harborfreight.com
Copyright
©
2010 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
Manual Revised 11g

Pacific hydrostar PacificHydrostar 2" Gasoline Powered Clear Water Pump Specifications

General

Pump Type	Centrifugal
Max Flow Rate	158 GPM
Suction Head	26 ft
Engine Power	6.5 HP
Inlet Size	2 in
Outlet Size	2 in
Fuel Tank Capacity	0.95 gal
Engine Type	4-stroke

Summary

Pump and Engine Specifications

Pump Specifications

Details the suction/discharge size, capacity, head, and pressure for the water pump.

Engine Specifications

Covers displacement, type, cooling, fuel, oil, sound level, bore/stroke, and other engine details.

Equipment Setup Guide

Connecting Inlet and Discharge Hoses

Instructions for attaching suction and discharge hoses to the pump, including strainers and clamps.

Equipment Operation Procedures

Pre-Start Inspection and Checks

Inspect pump and engine for damage or loose parts before set up and starting.

Pump Priming Procedure

Filling the pump housing with clean water before starting the engine.

Engine Oil Level Check and Fill

Procedure for checking and adding engine oil to ensure proper lubrication.

Fuel Tank Check and Refueling

Instructions on how to safely check and add gasoline to the fuel tank.

Maintenance and Service Information

Maintenance and Lubrication Schedule

A guide for regular cleaning, maintenance, and lubrication tasks based on usage intervals.

90-Day Limited Product Warranty

Engine Emission Control System Warranty

Manufacturer Emission Warranty Coverage

Details the 2-year warranty period for emission-related parts and components.

Owner Responsibilities for Emission Warranty

Outlines owner's duties like performing required maintenance and proper use.

Emission Control Defects Warranty Provisions

Warranty Length of Coverage

Specifies the 2-year warranty period for engines and warranted parts after delivery.

No-Cost Repair or Replacement

Explains how to get warranted parts repaired or replaced at no cost through authorized stations.

Consequential Damages Warranty Coverage

Extends coverage to engine components failing due to the failure of a warranted part.

Warranty Coverage Exclusions

Lists conditions and actions, such as improper maintenance, that can void warranty coverage.

Maintenance and Service Requirements

Discusses owner's responsibility for maintenance and use of authorized parts.

Covered Warranted Parts

Lists specific parts, like the carburetor and ignition system, covered under the emission warranty.