To Next Page
W
whiteanneAug 9, 2025
What to do if my Pacific hydrostar Portable Utility Pump 65836 operates but does not pump water?
- LlsantiagoAug 9, 2025
If your Pacific hydrostar Water Pump runs but isn't pumping water, here are a few things to check: 1. First, the pump may not be primed. You should prime the pump. 2. The basket filter could be clogged. Check and clean the basket filter. 3. All the water may have been pumped out. In that case, turn off the pump and finish mopping up by hand. 4. The impeller might be worn out or jammed, so repair or replace the impeller as needed.
General
