Pack Leader ELF-20 - Specification of Label Reel

|
7
SPECIFICATION OF LABEL REEL
1.
Top of
copy
dispenses
first.
2.
Bottom
of copy
dispenses
first.
4.
Left side
of copy
dispenses
first.
NOTE: Label gap must not exceed 5mm or the machine will not function properly.
Base Paper:
Opaque or Translucent
Reel Inner Diameter:
3" (76 mm)
Reel Outer Diameter:
9.8" (250) mm
Interval of Label:
Min. 3 mm (between label)
Width of Base Paper:
Label Width + 4 mm
Width of Label:
120 H Label Head – 10~120 mm
Length of Label:
15 ~ 300 mm
Copy positions 1-4 labels wound out:
3.
Right side
of copy
dispenses
first.