Packo AX - Page 2

4
Manufacturers’ declaration according to annex IIA of the
“Machinery” Directive 2006/42 EC
We,
Packo Inox Ltd
Cardijnlaan 10 – Industriepark Heernisse
B-8600 DIKSMUIDE
BELGIUM
conrm that the Packo pump type
……..................................………, with serial number ................................................................................................................
fully complies with the Directive Machinery and with the (harmonised) standard EN 809, ENISO12100.
It must be brought to your attention that our product is intended to be built into a machine, and that,
on the basis of the “Machinery” Directive, the complete (compound) machine can only be applied
after matching the stipulations of the European demands.
PACKO Inox Ltd, Cardijnlaan 10, B-8600 DIKSMUIDE, BELGIUM is authorized to make up the
technical construction le.
Date
.............................................................................................................
Signature:
.................................................................................................................................................................
Wim Bonte
BU Manager pumps
Packo Inox Ltd