Dimensions and Weight
The dimensions and weight are:
Width 177 mm.
Height 50 mm.
Depth 228 mm.
Weight 1.75 kg.
Supply
The transceiver requires the following supply:
Input voltage 13.2 V dc (nominal 12 V dc system).
Current Receive: 1 A (nominal).
Transmit: 5 A (nominal).
Receive Circuit
The specification of the receive circuit is listed below.
Sensitivity -102 dBm at 30% modulation depth for
12 dB SINAD (ITU - T).
Selectivity With 8.33 kHz spacing: <6 dB at ±3 kHz;
>60 dB at ±8.33 kHz.
With 25 kHz spacing: <6 dB at ±8.5 kHz;
>70 dB at ±25 kHz.
Intermodulation suppression >70 dB.
Spurious response suppression >80 dB.
Audio power output 4 W into 4 ohm loudspeaker (<10% THD).
Distortion <10% THD for 90% modulation depth.
RF input impedance 50 ohms.
Transmit Circuit
The specification of the transmitter is listed below.
Nominal RF output power Adjustable between 5 and 12 W. Normally set
at8W.
Spurious <-46 dBm when more than 1 MHz from the carrier.
Harmonic outputs <-36 dBm.
Distortion <5% THD.
RF load impedance 50 ohms.
T6M User Guide
Page 12