Unpacking
Unpack the consignment and check the contents. The following items should be
included:
(1) T6M mobile transceiver (quantity 1).
(2) Installation kit comprising,
q
Mounting bracket for the transceiver (quantity 1).
q
Loudspeaker (quantity 1).
q
Microphone (quantity 1).
q
Microphone rest (quantity 1).
q
Fixing kit knobs (quantity 2).
q
Rubber grip (quantity 2).
q
Power lead (quantity 1).
q
Fuse holder (quantity 1).
q
Fuse 7.5 amp (quantity 1).
q
Blue in-line crimp connector (quantity 1).
q
Screw No. 6, ¾ inch long (quantity 2).
q
Screw No. 8, ¾ inch long (quantity 6).
(3) Whip antenna (complete with approximately 4.8 m of coaxial cable).
Selecting a Mounting Location
Choose a location for the radio's mounting bracket. Avoid mounting in small enclosed
spaces (for example, glove lockers). To prevent overheating, the radio should have an
unobstructed airflow space of at least 20 mm at the rear. Suitable mounting places
include the dash, console or transmission hump. Ensure that the radio:
q
Is easy to operate when seat belts are worn.
q
Does not inconvenience driver or passengers when seated, or when entering or
exiting the vehicle.
q
Will not injure occupants if the vehicle suffers an impact.
q
Does not interrupt the airflow from the heater or air-conditioning vents.
T6M User Guide
Page 14
To Next Page
Loading...
Need help?
General