Need help?Do you have a question about the PageOne 2 and is the answer not in the manual?
Instructions on how to charge the 2-way Pager using the supplied mains adapter and lithium polymer battery.
Guidance on correctly inserting the lithium polymer rechargeable battery into the back of the 2-way Pager.
The 2-way Pager automatically switches itself on after the batteries have been installed.
Instructions on how to directly switch the pager back to stand-by mode by pressing and holding the upper scroll key.
How new messages are displayed, alerted, and read, including the need to deactivate key lock for reading.
Details on how to read, save, and delete messages from the call memory and message list.
How to read new messages, stop alerts, and respond with predefined messages or abort the response.
Details the default 10-minute period for responding to messages, which can be configured by organizations.
Information on how the integrated GPS receiver module provides location data when responding to messages.
Instructions for switching the alarm clock on/off and setting the specific time for the alarm to activate.
Explanation of how the alarm clock function can automatically switch on the pager at a set time.
How the date and time are automatically set using available GPS signals on the 2-way Pager.
Instructions to activate or deactivate the key lock function, referencing page 9 for details.
Information on activating or deactivating position finding and its effect on the GPS module.
Instructions to activate or deactivate the response to messages via the GSM function.
Details on how to recharge the integrated lithium polymer rechargeable battery, including charging time.
Step-by-step guide on how to switch off the 2-way Pager via the menu and confirmation prompts.
Instructions on how to switch the 2-way Pager on by pressing any key for a long time.
Explanation of how the alarm clock function can automatically switch on the pager at a set time.
To Next Page
General
