6
7
NOTE!
In rare cases, the LEDs do not indicate that the FINDER is fully charged when char-
ging for the first time. If the LED lights still do not indicate the end of charging after
10 hours of charging, please disconnect the FINDER from the power supply and
start using it. Then simply check the battery level in the FINDER-Portal.
Wait for the end of the char-
ging process. The unit is fully
charged when the red LED
goes out, see „1.10 Meaning of
the LED lights“ of this manual.
4.
1.4 Activation
In order to use your EASY Finder 4G, you will need to previously activate it
online. Enter the following link and follow the instructions:
Plug the USB wall plug adapter
into a power socket.
3.
With an active tracking time of approx. 1 hour per day, the EASY Finder 4G offers a
battery life of approx. 10 days without charging in between! However, it should be
noted that the runtime depends on the utilisation. The more the device is moved
and the more alarms are sent, the higher the utilisation.
To Next Page
Loading...
Need help?
General