8
9
1.5 Start-up
If the activation is successfully carried out, the FINDER is ready to be switched on.
The on/off button is is located at the top right of the FINDER.
Switch on:
Press the button briefly once to the turn the device on. The LEDs flash for 5
seconds. For information regarding the LED lights, see section „1.10 Meaning of
the LED lights“.
Switch off:
Press the button 5 times within 5 seconds. The FINDER then switches off.
NOTE!
We recommend that after you start your device for the first time you move it in
an open space (for example during a walk or a short car ride). This can speed
up the connection process, meaning that your device will connect to the best
available network more quickly. A good network connection is required in order
for the device to send and log data in the FINDER Portal.
1.6 Handling of the SOS button
Hold the button down for 5 seconds in a row and the FINDER will send the
alarm. You can see whether an alarm has been sent by the LEDs flashing alter-
nately for 12 seconds.
5 sec.
To Next Page
Loading...