POWER Finder v.1.2DE
© PAJ UG (haftungsbeschränkt)
25
5.4 Loading
Before the first use, you should charge the
GPS Tracker approx. 8 12 hours. Connect
the supplied charging cable to the charging
port of the GPS tracker. Then attach the
USB port to the socket adapter. If the GPS
tracker is connected to the power source,
charge it as long as the red LED goes out.
5.5 Launching the product for the first
time, turning on and LED signals
Turn on the POWERfinder by sliding the
switch upwards. Then the LED lights turn on.
The following shows the meaning of the
different LED signals.
To Next Page
Loading...
