EasyManua.ls Logo

PAJ POWER - Page 48

PAJ POWER
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
POWER Finder v.1.2DE
© PAJ UG (haftungsbeschränkt)
48
In case of alarm, an SMS with the content
move alarm!+information“
will be sent to the authorized number.
If you want to modify the radius, please send
the following message:
Example: „move0300“
0300 complies with 300 meters. Please
make sure that the radius is not too small, in
order to prevent a false alarm. We
recommend leaving the setting of 500
meters. Please also ensure that the number
always has four digits.
If the alarm was triggered once, then this
function is set to the wait state. After the
GPS tracker has not been moved for 10
minutes, the alarm will automatically turn on
again. The radius comes back to the position
where the GPS tracker stays for 10 minutes.

Related product manuals