Pakedge Device & Software S18e User Manual

2
 Store-and-forward architecture filters fragment & CRC error packets
 Supports 16K MAC address entries in whole system
 3.5Mbit buffer memory
 Supports IEEE 802.3az Energy Efficient Ethernet
 Supports automatic loop detection and isolation
 Support 9K bytes Jumbo Frames
 Supports extensive LED indicators for network diagnostics
 Internal power adapter
 FCC,VCCI,CE Class A, Meet RoHS
The Front Panel
The front panel consists of LED indicators. For detailed LED definition, please refer to the
next paragraph.
LEDs Definition
System LED
LED
Status
Operation
Power
Steady Blue
The switch is powered on
Off
The switch is powered off
Loop
Blinking Red
Off
There is a loop existing
There is no loop existing
Port LEDs
LED
Status
Operation
Link / ACT
Steady Blue
Valid port connection at 1000 Mbps
Blinking Blue
Valid port connection and there is data transmitting/ receiving
Off
Port disconnected

Pakedge Device & Software S18e Specifications

General

Brand	Pakedge Device & Software
Model	S18e
Category	Switch
Language	English