Pakedge Device & Software SE-8P2-EP User Manual

pakedgedevice&software inc
SE-8P2-EP
8 Port PoE Plus Powered Gigabit Ethernet Switch with
Two PoE Pass-through ports
or Four PoE Pass-through ports with AC adapter
User Manual – Version 1.0

Pakedge Device & Software SE-8P2-EP Specifications

General

Brand	Pakedge Device & Software
Model	SE-8P2-EP
Category	Switch
Language	English

Summary

Introduction to the Gigabit Ethernet Switch

General Description of SE-8P2-EP

Details the switch's Gigabit Ethernet capabilities, auto-negotiation, and use for network segmentation.

Key Features of the PoE Switch

Front Panel Overview and Indicators

LED Indicator Definitions

Rear Panel and Port Specifications

Rear Panel Port Description

Details the function and specifications of each port on the rear panel, including power and data capabilities.

Technical Product Specifications

Switch Installation Guide

Steps for Switch Installation

Provides step-by-step instructions for physically installing the network switch, including initial setup procedures.

Network Cable Installation Requirements

Straight-Through vs. Crossover Cables

Explains the use of Auto-MDI/MDI-X and the compatibility of cable types for connections.

Ethernet Cable Category Selection

Guides on selecting appropriate Ethernet cables based on speed requirements for optimal performance.