Pakon Part#125307-B October 10, 2006 5
11. Clean the F-135 from any dust that may be inside the scanner. Please refer to these procedures
in the “Operator Maintenance” chapter.
BIOS Configuration
The following BIOS options are used on systems configured by Pakon, and are recommended to
be configured as outlined below.
Option Setting
Plug and Play O/S Disable
AGP Aperture Size 32MB
PCI Latency Timer 248
ACPI Suspend State S1 State
USB Boot Disable
PXE Boot to Lan Disable
PCI to DRAM Prefetch Disable
To Next Page
Loading...
