4
Machine installation
14
Subject to change without notice
Metal angled pieces
Picture 8467
The machine can then be taken off the pallet using a forklift truck. The forks of the forklift
truck must be positioned as shown in the photograph below because of the centre of gravity.
The machine must be moved carefully in order to prevent it from tilting.
T
IP: Screw the adjustable feet (2) in the holes. The adjustable feet are part of the
accessories in the tool box delivered with the machine. They are screwed into the machine
frame.
View
Picture 1779
Picture 1782
(1)
(1)
(2)
(2)
To Next Page