Machine installation
4
Subject to change without notice
13
4 Machine installation
4.1 Transport
Lifting load delta502 (incl. packing) at least 1400
Lifting load delta700 (incl. packing) at least 2t
Length of forks delta502 at least 1,20 m
Length of forks delta700 1,40 m
The packaging varies depending on the country being delivered to. However, the pallet has
the same design for all packaging variations.
The forks of the forklift truck must be positioned as shown in the photograph below because
of the centre of gravity. The machine must be moved carefully in order to prevent it from
tilting.
delta
Picture 1784-r
4.2 Unpacking
Remove the plastic packaging or the seaworthy crate from the machine. The machine is
secured and screwed down to the transport pallet by metal angled pieces. Remove the
screws so that the metal angle pieces (1) can be removed.
Check the machine for any transport damage. If there are any faults or damage, contact the
supplier or the transport company immediately, giving the machine description and serial
number.
To Next Page
Loading...