Ohjekirja Palax combi M 2004.1 En
8
1.2 Intended use of the machine
This Firewood Processor with Conveyor is intended for the purpose of producing firewood
primarily of round timber, but of logs as well.
Use of the machine for any other purposes is prohibited.
Maximum size of the wood:
For cutting, the maximum diameter of the tree is about 25 cm.
The maximum length of the log is 4 m.
If the trees are longer than this, they must be pre-cut to a suitable length.
1.3 Markings affixed to the machine
Beware the saw-blade Read the instruction manual Always use eye guards and
protectors hearing
.
Stopping the splitting Hydraulic height adjustment Manual start of the splitting
cylinder with the foot pedal of the splitting blade, optional cylinder
High-speed splitting Normal splitting speed Speed of the PTO shaft
1.4 Nameplates
Nameplate on the machine
The name and address of the manufacturer
Designation of the machine type
Serial number and year of manufacture
Total weight of the machine
Diameter of the circular saw-blade 700 mm, the hole 35 mm.
The highest permitted rotational speed 2,000 r.p.m.
Nameplate at the rear of the blade housing
Nameplates on the electric drive
3-phase motor
Voltage 230 / 380 V or 380 / 600 V, may vary depending on the country.
Output 7.5 kW.
To Next Page
Loading...