Tips:
Maintenance
Coffee beans contain oil. It will coat the hopper, burrs and grinding chamber
over time. If you have used the grinder for more than 6 months, deep clean is
necessary to remove out all the oil, dirt and coffee pieces. You may use 3-5g
rice for cleaning. Cleaning procedure is as below:
• Put the rice into hopper.
• Twist lower housing to choose grind size. Suggested grind size is 4-5 as the
motor will be over-heated if the grind size is too fine.
• Before doing normal grinding job, please grind 3-5g coffee beans to make
sure that no rice is remained in the hopper, burrs and grinding chamber.
Reminder : The hopper is built inside the grinder. Please do not try to twist out
the hopper.
To Next Page
Loading...