Pall Allegro 500 L User Manual

22
Figure 39
500 L stacked open totes
Figure 40
500 L stacked collapsed totes
Stacking should be carried out when totes are empty. For 500 L totes that are to be stacked and used
with Allegro biocontainer systems, installation of the single-use systems within the totes should be done
through the front access door after stacking as shown in Figures 23 and 24 above (section 5.2.2).
Design systems and operational sequences so that, wherever possible, stacked totes are filled in
sequence from bottom to top tote, and emptied in sequence from top to bottom tote.
WARNING: Open totes should not be stacked if installed on a trolley (Figure 41).
Figure 41
Do not stack open totes on a trolley
X

Pall Allegro 500 L Specifications

General

Brand	Pall
Model	Allegro 500 L
Category	Laboratory Equipment
Language	English