Pall Palltronic Flow Check II

Need help?

Do you have a question about the Pall Palltronic Flow Check II and is the answer not in the manual?

Summary

Safety and Information Symbols

Safety Instructions

Personal Safety

Protective clothing and tubing for pneumatic systems.

Safe Use of the Palltronic Flow Check II Unit

Use of compressed air, pressure limits, and vent port.

Introduction

Key Features and Benefits

Verifying instrument function before testing critical filters.

Standard Functions

Verifying operation and calibration status; not a replacement for calibration.

Using the Palltronic Flow Check II Unit

Features

Pneumatic ports ('IN' and 'Vent') and specification label.

Display Function

Sequence of displays activated by the 'Start' button.

Test Preparation

Bringing the unit to room temperature and connecting ports.

Performing a Flow Check Test

Steps to select, set parameters, and activate the 'Flow Check' test.

Understanding the Test Results

Interpreting flow rate deviations against expected values.

Maintenance

Changing the Battery

Procedure for replacing the unit's battery.

Troubleshooting

Preliminary Troubleshooting

Checks for display, battery, connections, and environmental conditions.

Continued Difficulties

Guidance for persistent issues and seeking further support.

Appendix A - Atmospheric Pressure Correction Table