Palm IIIe - Chapter 6: Advanced Hotsync Operations; Selecting Hotsync Setup Options

Chapter 6 Page 139
Chapter 6
Advanced HotSync
®
Operations
HotSync
®
technology enables you to synchronize data between one or
more Palm Computing
®
connected organizers and Franklin Planner
software. To synchronize data, you must connect your Palm IIIe™
organizer and Franklin Planner software either directly, by placing
your organizer in the cradle attached to your computer, or indirectly,
with a modem or network.
This chapter describes how to select HotSync options and perform a
HotSync operation via a modem or network. See “Exchanging and
updating data: HotSync operations” in Chapter 4 for information
about performing your first and subsequent local HotSync operations.
Selecting HotSync setup options
You can choose when you want HotSync Manager to run. If necessary,
you can adjust the local and modem HotSync settings as well.
To set the HotSync options:
1. Click the HotSync Manager icon in the Windows system tray.
2. Choose Setup.
3. Click the General tab and select one of the following options: