Palm IIIe - Entering a Password; Adding Telephone Settings

Page 162 Chapter 7
Entering a password
The Password box identifies the password you use to log into your
server or ISP. Your entry in this field determines whether your
organizer prompts you to enter a password each time you log into
your network:
■ If you do not enter a password, your organizer displays the word
“Prompt” in this field and asks you to enter a password during the
login procedure.
■ If you enter a password, your organizer displays the word
“Assigned” in this field and does not prompt you to enter a
password during the login procedure.
Note: If you are concerned about security, select the Prompt option
and do not enter a password.
To enter a password:
1. Tap the Password field.
2. Enter the password you use to log into your server.
3. Tap OK.
Note: The Password field updates to display the word “Assigned.”
Adding telephone settings
When you select the Phone field, your organizer opens a dialog box in
which you define the telephone number you use to connect with your
ISP or dial-in server. In addition, you can also define a prefix, disable
Call Waiting, and give special instructions for using a calling card.
Note: The Phone Setup dialog box works correctly for AT&T and
Sprint long-distance services. However, because MCI works
differently, MCI customers need to put the calling card
number in the Phone # field and the phone number in the Use
E
nter passwor
d
h
ere
Tap here