Palm IIIe - Selecting the Conduits for a Modem Hotsync Operation; Performing a Hotsync Operation Via a Modem

Page 148 Chapter 6
11. Enter the settings. See “Modem preferences” in Chapter 7 for more
information.
Selecting the conduits for a modem HotSync operation
The Conduit Setup dialog box on your organizer enables you to define
which files and/or applications synchronize during a modem
HotSync operation. You can use these settings to minimize the time
required to synchronize data with a Palm Modem accessory.
To change the Conduit Setup for a modem HotSync operation:
1. Tap the Applications icon .
2. Tap the HotSync icon .
3. Tap the Menu icon .
4. Tap Options, and then tap Conduit Setup.
5. Tap the check boxes to deselect the files and applications that you
do not want to synchronize during a modem HotSync operation.
The default setting is to synchronize all files.
Note: Applications that do not have a database (such as games)
do not synchronize — even if you select the item in the
Conduit Setup dialog box.
6. Tap OK.
Performing a HotSync operation via a modem
After you prepare your computer and your organizer, and select your
Conduit Setup options, you are ready to perform a modem HotSync
operation.
To perform a modem HotSync operation:
1. Tap the Applications icon .