Tungsten™ E2 Handheld 14
CHAPTER 1 Setting Up Your Handheld and Your Computer
Synchronizing with a user profile
WINDOWS ONLY
0
3 Select the profile from the User pop-up menu, and create the info in
Palm Desktop software for the profile.
4 Set the profile’s conduit settings:
a. From the HotSync
®
menu, select Conduit Settings.
b. Select the conduit settings
for the profile.
Done
1 Begin synchronization:
a. Connect the USB sync cable to the USB port on the back of your computer,
and then insert the other end into the Multi-connector on your handheld.
b. Press the sync button on the USB sync cable.
Continued
To Next Page
Loading...
