Palm Tungsten T2 Read This First

3
Set up
a. Remove the handheld from the cradle.
c. Remove the stylus.
d. Follow the Setup instructions on the screen.
1. Tilt it forward.
2. Lift up.
b. Turn on the handheld by pressing the power
button.*
Power button
Stylus
To remove it, gently
press the top of the
stylus to release it
from the slot. Then
pull it out of the slot.
* Problems? See "Troubleshooting" section in the
upcoming pages.
Center
e. Tap firmly the center of at least three
targets.

Palm Tungsten T2 Specifications

General

Brand	Palm
Model	Tungsten T2
Category	PDA
Language	English