The indicator light does not go on.
1. Seat your handheld firmly in the cradle.
2. Connect the power adapter securely to the cradle.
3. Make sure that the power adapter is plugged into a working electric outlet.
Your handheld does not turn on when you press the power button.
1. Press any application button to ensure that your handheld is turned on.
2. Perform a soft reset:
a. Slide open your handheld.
b. Use the tip of your stylus or an unfolded paper clip
(or similar object without a sharp tip) to gently press
the reset button inside the hole on the back panel of
your handheld.
3. Charge your handheld for another full two hours.
a. Place your handheld in the cradle.
b. Make sure the indicator light is on.
TROUBLESHOOTING
Reset
button
To Next Page
Loading...
