Palm Tungsten Tungsten T Handhelds Read This First

ENGLISH
3
Charge the handheld by placing it in the
cradle. The indicator light is solid green
when the handheld is being charged.*
Charge the handheld for two hours.
* If the indicator light did not go on, see section
“Troubleshooting charging the handheld”.
4
Set up the handheld after it is charged.
(a) Remove the handheld from the
cradle.
(b) Press the power button. Remove
the stylus and use it to complete
the instructions that appear on
your handheld screen.*
1. Tilt it forward.
2. Lift up.
Power button
Stylus
To remove it, gently
press the top of the
stylus to release it
from the slot; then
pull it out of the slot.
* If your handheld did not turn on, see
section“Troubleshooting turning on the
handheld”.

Palm Tungsten Tungsten T Handhelds Specifications

General

Brand	Palm
Model	Tungsten Tungsten T Handhelds
Category	Handhelds
Language	English